The brakes lights are among the most important lights on the vehicle. Grant it, most of the lights are vital, but the brake lights serve as a warning to the drivers following behind you. If you do not have brake lights, the driver behind you may not know to slow their vehicle when you slow and stop and a rear-end collision may occur because of the absent of working lights. Not to mention, having no brake lights is illegal, that is all brake lights need to function properly to comply with roadworthy laws. Therefore, it is very vital to make sure the lights work right, no matter what. If you have an issue with the brake lights, you need to have them looked at as soon as possible by an auto electrician.
Newer cars have brake lights that connect to a circuit board. This keeps the bulbs working individually, so if one bulb goes out, then the others will continue working. The brake lights actually serve two purposes. One purpose is to illuminate when the lights are on, for night driving. This low intensity light shows that the car is in motion and the lights will be on in the front as well. When the brake pedal is applied, the brake light brightens in intensity, serving to alert the driver behind you; the car is slowing down or stopping.
Some vehicles have brake lights in the middle position (normally above in the rear window or on the rear spoiler). This brake light may be even brighter than the ones near the signal lights, and they serve to get more attention to vehicles behind. The third brake light comes on at the same time as the other two, so there are triple warning lights, which will help to get the other driver’s attention faster. Brake light bulbs need to be replaced as soon as they go out. There are several ways of checking for this.
Some vehicles now use LED lights which are usually smaller bulbs, generally last longer, and will save energy. There are usually multiple LED lights used in conjunction and if one does not operate the others will still function.
The brake light may share a lens with the signal lights, and if this is the case, the bulb with two elements is the brake light bulb. Otherwise, the brake light is behind a red lens and the turn signal is behind a yellow lens or sometimes clear external lens. The third brake light, if there is one, is usually in the middle away from the signal lights. If there are any issues with brake lights, call on Canberra Auto Electrical to send out an auto electrician to help take care of the vehicle’s lights. They are experienced and capable of replacing brake lights as well as any of the lights on the vehicle or anything with the electrical system.