Redarc BCDC1240D Dual Input 40A In-vehicle DC Battery Charger
$679.00
The REDARC BCDC1240D is a 12V 40A In-vehicle DC to DC battery charger suitable for battery types including lithium, AGM, GEL, standard lead acid and calcium.
The REDARC BCDC1240D In-vehicle Battery Charger is a 12V 40A In-vehicle DC to DC battery charger. It is the latest variant of the award-winning BCDC Dual range and features REDARC’s Smart Start technology.
Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1240D will charge from both solar and the alternator simultaneously. With built-in ‘Green Power Priority,’ it will select solar charging first, meaning less load on the alternator.
Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.
The BCDC1240D also comes with patented charging profiles, including a lithium charging profile perfect for pairing with a REDARC Lithium Battery. The ‘Dual’ input range will continue to charge all other types of batteries including AGM, GEL, standard lead-acid and calcium.
As a guide, the BCDC1240D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225D.
Proven and Tested
The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.
Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.
If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.
Features:
- Separate DC and solar charging inputs
- Maximises the performance and life of your auxiliary battery
- Simultaneous DC and solar charging with Green Power Priority
- Suits 12V/24V standard and variable voltage/smart alternators
- Suitable for AGM, GEL, standard lead acid, calcium and LiFePO4 batteries
Specifications:
- Input (Operating) Voltage 9 – 32VDC
- Output System Voltage 12VDC
- Maximum Charging Voltage 15.3V
- Output Current Rating (Cont.) 40A
- Type Approval E-Mark
- Input Fuse Rating 60A
- Output Fuse Rating 60A
- Warranty 2 Years
- Standby Current Draw <100mA
- Output Power 600W
- Width (mm) 120
- Height (mm) 37
- Length (mm) 165
- Weight (kg) 1
| Weight | 2 kg |
|---|---|
| Dimensions | 20 × 20 × 5 cm |
Related products
